Feed processing
Gentor Machinery supplies feed pellet machines for poultry and livestock feed, covering a 100 kg/h mini press, a 220 V 3 kW flat-die mill, a 120-150 kg/h mobile unit and a 200 kg/h ring-die mill. All models are quoted from a one-set minimum order.
Compare models
Published capacity, power and unit price side by side. On a phone each model becomes its own card, so nothing has to be scrolled sideways.
| Model | Duty / type | Throughput | Power | Published price (USD) |
|---|---|---|---|---|
| Mini Feed Pellet Press, 100 kg/h | Mini feed pellet press | 100 kg/h | Confirm on quotation | US$300-319 |
| Flat Die Feed Pellet Machine, 220 V 3 kW | Flat die feed pellet machine | Confirm on quotation | 220 V, 3 kW | US$299-319 |
| Ring Die Feed Pellet Mill, 200 kg/h | Ring die feed pellet mill | 200 kg/h | Ring die | US$275-288 |
| Mobile Electric Feed Pellet Machine, 120-150 kg/h | Mobile electric feed pellet machine | 120-150 kg/h | Portable, wheel-mounted | US$280 |
Published prices are indicative unit prices from our supplier listings and are confirmed per order. Values shown as “Confirm on quotation” are not published for that model; ask the sales team for the datasheet.
Selection help
Four things decide which model fits, before price is even discussed.
Flat-die machines are simpler and cheaper to run in short batches, which suits a single farm. Ring-die mills tolerate longer continuous shifts and are the right choice when pelletising is the bottleneck in a feed line.
A 100 kg/h press covers roughly 800 kg in an eight-hour day, enough for a small poultry flock. Work out daily feed consumption first, then buy the machine that covers it with a little headroom.
The flat-die machine runs a 220 V 3 kW motor, which suits sites with single-phase power. Larger mills need a heavier supply. Tell us your voltage, phase and frequency and we will match the motor.
Freshly pressed pellets are hot and soft. Plan a simple cooling and drying area so pellets harden and store without mould, especially in humid climates.
Models
Open a model for its full specification, applications and packing information.
Throughput: 100 kg/h
US$300-319 per set · MOQ 1 set
Die type: Flat die
US$299-319 per set · MOQ 1 set
Throughput: 200 kg/h
US$275-288 per set · MOQ 1 set
Throughput: 120-150 kg/h
US$280 per set · MOQ 1 set
Questions
Answers written against the capacities and prices we publish, not against a template.
Published unit prices run from US$275 to US$319 per set across the range, depending on throughput and die type. The final price depends on configuration, motor specification and destination port, so we quote each order individually before you commit.
Choose a flat-die machine for short daily batches on a single farm, especially where only 220 V single-phase power is available. Choose a ring-die mill when pelletising runs continuously inside a feed production line and higher throughput justifies the larger machine.
Yes. The listed models cover chicken, pig, rabbit, duck, cattle and sheep feed. Pellet diameter is set by the die, so tell us which animals you feed and we will supply the die size that suits them, with alternatives quoted separately.
These machines pelletise ground grain and mixed feed ingredients into a hard pellet. Grinding happens before pelletising, so a hammer mill is usually part of the same line. Tell us your recipe and the ingredients you have locally so we can advise on the preparation steps.
Get a quotation
Send the model or the job, your country and your destination port. We reply with the price per set and the shipping method.
