Buyers ask which Chinese manufacturers export to Africa expecting a list. A list is the least useful answer, because every name on it sells into the same ports and the difference between them is not the country — it is the range, and whether the machine you need sits in it at a price you can work with.
So here is the range itself, with the published entry price in each of the eight categories we supply. Every figure below is the published price for the named model, per set.
Eight categories, eight published entry prices
| Category | Representative model | Published price (per set) |
|---|---|---|
| Grain planter | Hand Push Roller Seeder | US$36-42 |
| Feed pellet machine | Ring Die Feed Pellet Mill, 200 kg/h | US$275-288 |
| Huller | Peanut Sheller with Sieve, 200 kg/h | US$290-299 |
| Chaff cutter | Multipurpose Silage Chopper, 300-1200 kg/h | US$344-355 |
| Rice mill | Portable Automatic Mini Rice Mill | US$500-510 |
| Tractors | Compact Walking Tractor, 18 HP, 2WD | US$899 |
| Harvesting machinery | Sugarcane Combine Harvester, 200 HP | US$15,200 |
| Motor graders | Heavy Duty Motor Grader, 180 HP | US$51,515 |
The spread from roughly forty dollars to roughly fifty thousand is the point. A supplier who can only quote in one band will push you into it, and buyers who ask for "a tractor" before they have worked out what they are mechanising usually end up with more machine than their cultivated area can pay for.
What actually changes when you buy from Africa
The machine concept does not change. Three things around it do:
- Power supply at your site. Rice mills and chaff cutters are published with their motor ratings. Check your supply can carry the model before the order, not after it lands.
- Packing for sea freight. Ask how the machine is packed for container loading rather than for road delivery.
- Spares in the same shipment. Freight on a small part costs more than the part. Ordering the wear parts with the machine is normal practice and worth doing deliberately.
What to ask before any quotation is comparable
Four statements, in writing, for each category you are considering: capacity or throughput, the power requirement, the MOQ, and what the quoted price covers. Then one more that is easy to forget — a named lead time with the shipping method it assumes.
Where a supplier cannot give the power requirement, the comparison cannot be made, because the electrical work is a real cost that sits outside the machine price.
If you tell us what you are mechanising, the area or volume involved, and your port, we will tell you which category to start with and which model in it fits — including when the honest answer is that the category you asked about is not the one you need first.
